Reverse Osmosis Unit

Reverse Osmosis Unit

Our 4040 Series RO Series Reverse Osmosis Unit is fully automated and is an affordable solution for applications up to 10,000 gallons per day and removes up to 99% of total dissolved solids in raw feed water.

STANDARD FEATURES

316 Stainless Steel Frame
Chem Pump Receptical
Dual TDS Monitor
Electronic controller with indicator for tank full, low pressure, pre-treatment lock out, flushing, and processing.
Unit on / off switch
Large capacity 20” BB 5-micron sediment pre-filter
Automatic inlet shut-off valve with air purge on start up
Automatic feed water flush
Liquid filled pre-filter, post-filter, and membrane pressure gauges
Product, waste, and recycle flow meters
Stainless steel flow control valves
Low pressure pump protection

OPTIONAL FEATURES

Fiber-glass membrane housings
Antiscalant Pump
Stainless steel pump
S-100 Controller
High rejection or Nano membranes
CSA approval
Clean in place system
Antiscalant Solution
OPERATING PARAMETERS
Operating pressure: 120-190 psig
Minimum inlet pressure: 30 psig
Operating temperature: 33-100 F
Normal recovery: 50-75%
Nominal salt rejection: 95-98%
MATERIAL OF CONSTRUCTION
Frame: Industrial SS
Industrial NEMA rated control box
Membrane elements: Low energy (XLE)
Membrane housings: 304SS
Piping: Sch 80 PVC, Brass, SS
Tubing: NSF 61 High Density Polyethylene

FOR APPLICATION SUCH AS

ECA Feed Water
Boiler Treatment
Spot free Rinse
Ice Making
Greenhouses
Research and Medical Labs
Process Make-up Water Humidification
Ion Exchange Pre-treatment
Bottle Water
Food and Beverage Processing
Industrial Reverse Osmosis Systems

FULLY AUTOMATED

The Industrial Reverse Osmosis Systems are engineered to economically produce high purity water by removal of most dissolved minerals, bacteria, particles, and organic impurities.
Each OMN-8H machine is constructed using the highest quality components and materials for reliable operation and exceptional performance. System output range from 25-300 GPM (36,000-432,000 GPD).

Our specialty is skid mounted, pre-piped, and pre-wired equipment allowing for quick installation and start-up time.

STANDARD FEATURES

• 8” x 40” High rejection membrane
elements
• pre-filter housing (304SS)
• Stainless steel NEMA-4 electrical
enclosure
• Horner PLC w/Smartrail remote I/O
• Danfoss Variable Frequency Drive pump
control
• Product water conductivity transmitter
• Product,recirc,and reject flow transmitters
• Product,recirc,and reject sight flow meters
• System pressure transmitters
• 316SS pressure gauges
• Auto & Permeate flush
• Blend Back Valve

PUMP AND MOTOR

• Pump: 304/316SS Grundfos multi-stage
• Motor: , 208-480 VAC, 3-phase, 60 Hz.

FOR APPLICATION SUCH AS

ECA Feed Water
Humidification
Ice-making
Bottled Water
Portable Water
Evaporative coolers
Horticulture
Livestock
Dairies
ZM IND RO.001

OPERATING PARAMETERS

• Operating Pressure: 120-250 psig
• Feed Water Recovery: 75–80%
• Total Salt Rejection: 98–99%
• Operating Temperature: 45–85° F
• Design Temperature: 50° F
• Minimum Inlet Pressure: 30 psi
• Control Circuit: 120 VAC, 1-phase, 60 Hz.

MATERIAL OF CONSTRUCTION

• Skid Frame: Stainless Steel
• Membrane Elements: Dow Filmtec
• Membrane Housings: FRP (300 psig rated)
• Low pressure piping: Sch 80 PVC
• High pressure piping: Sch 10 304SS

Date

October 14, 2020

Category

Home Page